Free part 3D model · STL · Live 3D
Tightening bolt 3D model
Part of the plate heat exchanger 3D model · Frame & bolts · By Parth Parmar, mechanical design engineer · Updated
A tightening bolt pulls the pressure plate towards the frame plate. Download the tightening bolt free as an STL file (5 KB, 536 × 42 × 48 mm), see it in live 3D inside the plate heat exchanger, or get the whole machine.
Open full screen →
Live 3D opens the whole plate heat exchanger with the tightening bolt picked out, so you can see where it sits and how it moves. Open it full screen →
Download the tightening bolt STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the tightening bolt
A tightening bolt pulls the pressure plate towards the frame plate. Together they hold the pack at its tightening dimension; they are tightened in diagonal pairs, a little at a time, so the pressure plate stays parallel to the frame plate.
Never tighten below the minimum dimension on the nameplate: it can crush the plates.
Key facts
| Part of | Plate heat exchanger: Gasketed, 41 plates · DN100 · countercurrent |
|---|---|
| System | Frame & bolts: Frame plate, pressure plate, carrying and guiding bars, support column, tightening bolts and nuts. |
| Quantity | 4 in the machine |
| Size | 536 × 42 × 48 mm (real scale) |
| Mesh | 104 triangles |
| Size | M24 |
| Grade | 8.8 |
| File | STL, millimetres, Z-up, 5 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the frame & bolts
Frame plate, pressure plate, carrying and guiding bars, support column, tightening bolts and nuts.
- Frame plate
- Frame plate foot
- Pressure plate
- Pressure plate roller
- Carrying bar
- Guiding bar
- Support column
- Lifting lug
- Nameplate
- Tightening nut
- Tightening bolt cover
- Foundation bolt
Questions about the tightening bolt 3D model
Is the tightening bolt 3D model free to download?
Yes. The tightening bolt STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free plate heat exchanger 3D model on Engine-X.
What file format is the tightening bolt 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 5 KB with 104 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the tightening bolt?
Yes. The STL is real scale (536 × 42 × 48 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Tightening bolt 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Tightening bolt 3D model (plate heat exchanger) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/plate-heat-exchanger-tightening-bolt
All plate heat exchanger parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.