Free part 3D model · STL · Live 3D
Belt guard 3D model
Part of the reciprocating air compressor 3D model · Motor & belt drive · By Parth Parmar, mechanical design engineer · Updated
The belt guard covers the flywheel and V-belt to protect the operator. Download the belt guard free as an STL file (29 KB, 46 × 400 × 610 mm), see it in live 3D inside the reciprocating air compressor, or get the whole machine.
Open full screen →
Live 3D opens the whole reciprocating air compressor with the belt guard picked out, so you can see where it sits and how it moves. Open it full screen →
Download the belt guard STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the belt guard
The belt guard covers the flywheel and V-belt to protect the operator. A spinning flywheel and belt are an entanglement hazard, so every real compressor has one; it is drawn see-through here. Its mesh face still lets the fan pull air through.
Key facts
| Part of | Reciprocating air compressor: Two-stage V-twin · 12 bar (175 psi) · 3.7 kW |
|---|---|
| System | Motor & belt drive: Motor, motor pulley, V-belt, flywheel fan pulley and belt guard. |
| Quantity | 1 |
| Size | 46 × 400 × 610 mm (real scale) |
| Mesh | 588 triangles |
| Material | Sheet steel / mesh |
| File | STL, millimetres, Z-up, 29 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the motor & belt drive
Motor, motor pulley, V-belt, flywheel fan pulley and belt guard.
The same part in other machines
- Belt guardin the pulley & belt drive
Questions about the belt guard 3D model
Is the belt guard 3D model free to download?
Yes. The belt guard STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free reciprocating air compressor 3D model on Engine-X.
What file format is the belt guard 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 29 KB with 588 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the belt guard?
Yes. The STL is real scale (46 × 400 × 610 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Belt guard 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Belt guard 3D model (reciprocating air compressor) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/reciprocating-air-compressor-belt-guard
All reciprocating air compressor parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.