Free part 3D model · STL · Live 3D
Breather and oil-fill cap 3D model
Part of the reciprocating air compressor 3D model · Cylinders & valves · By Parth Parmar, mechanical design engineer · Updated
The crankcase breather and oil-fill cap lets the crankcase breathe and is where oil is topped up. Download the breather and oil-fill cap free as an STL file (11 KB, 31 × 34 × 36 mm), see it in live 3D inside the reciprocating air compressor, or get the whole machine.
Open full screen →
Live 3D opens the whole reciprocating air compressor with the breather and oil-fill cap picked out, so you can see where it sits and how it moves. Open it full screen →
Download the breather and oil-fill cap STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the breather and oil-fill cap
The crankcase breather and oil-fill cap lets the crankcase breathe and is where oil is topped up. It lets air in and out as the pistons move, so the crankcase does not pump itself up and push oil past the rings.
Key facts
| Part of | Reciprocating air compressor: Two-stage V-twin · 12 bar (175 psi) · 3.7 kW |
|---|---|
| System | Cylinders & valves: Crankcase, finned LP and HP barrels, valve plates, reed valves, heads and oil. |
| Quantity | 1 |
| Size | 31 × 34 × 36 mm (real scale) |
| Mesh | 216 triangles |
| File | STL, millimetres, Z-up, 11 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the cylinders & valves
Crankcase, finned LP and HP barrels, valve plates, reed valves, heads and oil.
- LP cylinder barrel
- LP valve plate
- LP cylinder head
- LP suction reed valve
- LP delivery reed valve
- HP cylinder barrel
- HP valve plate
- HP cylinder head
- HP suction reed valve
- HP delivery reed valve
- Crankcase
- Oil drain plug
Questions about the breather and oil-fill cap 3D model
Is the breather and oil-fill cap 3D model free to download?
Yes. The breather and oil-fill cap STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free reciprocating air compressor 3D model on Engine-X.
What file format is the breather and oil-fill cap 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 11 KB with 216 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the breather and oil-fill cap?
Yes. The STL is real scale (31 × 34 × 36 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Breather and oil-fill cap 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Breather and oil-fill cap 3D model (reciprocating air compressor) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/reciprocating-air-compressor-breather-and-oil-fill-cap
All reciprocating air compressor parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.