Free part 3D model · STL · Live 3D

Crankcase 3D model

Part of the reciprocating air compressor 3D model · Cylinders & valves · By Parth Parmar, mechanical design engineer · Updated

The crankcase, the cast-iron body of the pump. Download the crankcase free as an STL file (89 KB, 190 × 235 × 215 mm), see it in live 3D inside the reciprocating air compressor, or get the whole machine.

Crankcase 3D model from the reciprocating air compressor, free STL Open full screen →

Live 3D opens the whole reciprocating air compressor with the crankcase picked out, so you can see where it sits and how it moves. Open it full screen →

Download the crankcase STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the crankcase

The crankcase, the cast-iron body of the pump. It carries the main bearings, the two cylinders and the oil sump, and its fins and mass soak up heat.

Drawn see-through so the crank, rods and pistons stay visible.

Key facts

Part ofReciprocating air compressor: Two-stage V-twin · 12 bar (175 psi) · 3.7 kW
SystemCylinders & valves: Crankcase, finned LP and HP barrels, valve plates, reed valves, heads and oil.
Quantity1
Size190 × 235 × 215 mm (real scale)
Mesh1,788 triangles
MaterialGrey cast iron
FileSTL, millimetres, Z-up, 89 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the cylinders & valves

Crankcase, finned LP and HP barrels, valve plates, reed valves, heads and oil.

Questions about the crankcase 3D model

Is the crankcase 3D model free to download?

Yes. The crankcase STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free reciprocating air compressor 3D model on Engine-X.

What file format is the crankcase 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 89 KB with 1,788 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the crankcase?

Yes. The STL is real scale (190 × 235 × 215 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Crankcase 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Crankcase 3D model (reciprocating air compressor) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/reciprocating-air-compressor-crankcase

All reciprocating air compressor parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.