Free part 3D model · STL · Live 3D

Discharge tube 3D model

Part of the reciprocating air compressor 3D model · Air path · By Parth Parmar, mechanical design engineer · Updated

The discharge tube (aftercooler line) from the HP head down to the tank. Download the discharge tube free as an STL file (58 KB, 150 × 220 × 88 mm), see it in live 3D inside the reciprocating air compressor, or get the whole machine.

Discharge tube 3D model from the reciprocating air compressor, free STL Open full screen →

Live 3D opens the whole reciprocating air compressor with the discharge tube picked out, so you can see where it sits and how it moves. Open it full screen →

Download the discharge tube STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the discharge tube

The discharge tube (aftercooler line) from the HP head down to the tank. The hot compressed air cools a little on the way, so some of its water vapour condenses in the tank instead of in the air lines.

Key facts

Part ofReciprocating air compressor: Two-stage V-twin · 12 bar (175 psi) · 3.7 kW
SystemAir path: Intake filter, intercooler, discharge tube and check valve.
Quantity1
Size150 × 220 × 88 mm (real scale)
Mesh1,152 triangles
MaterialCopper
FileSTL, millimetres, Z-up, 58 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the air path

Intake filter, intercooler, discharge tube and check valve.

Questions about the discharge tube 3D model

Is the discharge tube 3D model free to download?

Yes. The discharge tube STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free reciprocating air compressor 3D model on Engine-X.

What file format is the discharge tube 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 58 KB with 1,152 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the discharge tube?

Yes. The STL is real scale (150 × 220 × 88 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Discharge tube 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Discharge tube 3D model (reciprocating air compressor) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/reciprocating-air-compressor-discharge-tube

All reciprocating air compressor parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.