Free part 3D model · STL · Live 3D

Intercooler (finned tube) 3D model

Part of the reciprocating air compressor 3D model · Air path · By Parth Parmar, mechanical design engineer · Updated

The intercooler: a finned copper tube from the LP head to the HP head, right in the flywheel fan's air blast. Download the intercooler (finned tube) free as an STL file (197 KB, 161 × 142 × 319 mm), see it in live 3D inside the reciprocating air compressor, or get the whole machine.

Intercooler (finned tube) 3D model from the reciprocating air compressor, free STL Open full screen →

Live 3D opens the whole reciprocating air compressor with the intercooler (finned tube) picked out, so you can see where it sits and how it moves. Open it full screen →

Download the intercooler (finned tube) STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the intercooler (finned tube)

The intercooler: a finned copper tube from the LP head to the HP head, right in the flywheel fan's air blast. It cools the first-stage air before the second stage, so the HP cylinder has less work to do and the air stays cooler.

Without intercooling, two stages would save little: the gain of two-stage compression comes from removing heat between the stages.

Key facts

Part ofReciprocating air compressor: Two-stage V-twin · 12 bar (175 psi) · 3.7 kW
SystemAir path: Intake filter, intercooler, discharge tube and check valve.
Quantity1
Size161 × 142 × 319 mm (real scale)
Mesh3,936 triangles
MaterialCopper, finned
FileSTL, millimetres, Z-up, 197 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the air path

Intake filter, intercooler, discharge tube and check valve.

Questions about the intercooler (finned tube) 3D model

Is the intercooler (finned tube) 3D model free to download?

Yes. The intercooler (finned tube) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free reciprocating air compressor 3D model on Engine-X.

What file format is the intercooler (finned tube) 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 197 KB with 3,936 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the intercooler (finned tube)?

Yes. The STL is real scale (161 × 142 × 319 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Intercooler (finned tube) 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Intercooler (finned tube) 3D model (reciprocating air compressor) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/reciprocating-air-compressor-intercooler-finned-tube

All reciprocating air compressor parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.