Free part 3D model · STL · Live 3D

Pressure switch with unloader 3D model

Part of the reciprocating air compressor 3D model · Controls & safety · By Parth Parmar, mechanical design engineer · Updated

The pressure switch starts and stops the motor automatically. Download the pressure switch with unloader free as an STL file (78 KB, 84 × 128 × 65 mm), see it in live 3D inside the reciprocating air compressor, or get the whole machine.

Pressure switch with unloader 3D model from the reciprocating air compressor, free STL Open full screen →

Live 3D opens the whole reciprocating air compressor with the pressure switch with unloader picked out, so you can see where it sits and how it moves. Open it full screen →

Download the pressure switch with unloader STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the pressure switch with unloader

The pressure switch starts and stops the motor automatically. It stops the motor when the tank reaches its cut-out pressure and starts it again when pressure falls to the cut-in setting. Its built-in unloader vents the discharge line each time the motor stops, so the motor can restart without pushing against full pressure.

Key facts

Part ofReciprocating air compressor: Two-stage V-twin · 12 bar (175 psi) · 3.7 kW
SystemControls & safety: Pressure switch with unloader, gauge, safety valve, service valve and drain.
Quantity1
Size84 × 128 × 65 mm (real scale)
Mesh1,560 triangles
Cut out≈ 12 bar (175 psi)
FileSTL, millimetres, Z-up, 78 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the controls & safety

Pressure switch with unloader, gauge, safety valve, service valve and drain.

Questions about the pressure switch with unloader 3D model

Is the pressure switch with unloader 3D model free to download?

Yes. The pressure switch with unloader STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free reciprocating air compressor 3D model on Engine-X.

What file format is the pressure switch with unloader 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 78 KB with 1,560 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the pressure switch with unloader?

Yes. The STL is real scale (84 × 128 × 65 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Pressure switch with unloader 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Pressure switch with unloader 3D model (reciprocating air compressor) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/reciprocating-air-compressor-pressure-switch-with-unloader

All reciprocating air compressor parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.