Free part 3D model · STL · Live 3D
Safety valve 3D model
Part of the reciprocating air compressor 3D model · Controls & safety · By Parth Parmar, mechanical design engineer · Updated
The safety (pressure relief) valve protects the tank from over-pressure. Download the safety valve free as an STL file (83 KB, 40 × 109 × 40 mm), see it in live 3D inside the reciprocating air compressor, or get the whole machine.
Open full screen →
Live 3D opens the whole reciprocating air compressor with the safety valve picked out, so you can see where it sits and how it moves. Open it full screen →
Download the safety valve STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the safety valve
The safety (pressure relief) valve protects the tank from over-pressure. If the pressure switch ever fails to stop the motor, this spring-loaded valve pops open before the tank can be over-pressurised.
Never plug or tie down a safety valve; pull its ring now and then to check it is not stuck.
Key facts
| Part of | Reciprocating air compressor: Two-stage V-twin · 12 bar (175 psi) · 3.7 kW |
|---|---|
| System | Controls & safety: Pressure switch with unloader, gauge, safety valve, service valve and drain. |
| Quantity | 1 |
| Size | 40 × 109 × 40 mm (real scale) |
| Mesh | 1,656 triangles |
| Type | Spring-loaded, pop-off |
| File | STL, millimetres, Z-up, 83 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the controls & safety
Pressure switch with unloader, gauge, safety valve, service valve and drain.
Questions about the safety valve 3D model
Is the safety valve 3D model free to download?
Yes. The safety valve STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free reciprocating air compressor 3D model on Engine-X.
What file format is the safety valve 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 83 KB with 1,656 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the safety valve?
Yes. The STL is real scale (40 × 109 × 40 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Safety valve 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Safety valve 3D model (reciprocating air compressor) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/reciprocating-air-compressor-safety-valve
All reciprocating air compressor parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.