Free part 3D model · STL · Live 3D

Centre housing (CHRA) 3D model

Part of the turbocharger 3D model · Bearing housing · By Parth Parmar, mechanical design engineer · Updated

The centre housing (CHRA: centre housing rotating assembly) carries the shaft in oil-fed journal bearings between the hot turbine and the cool compressor. Download the centre housing (chra) free as an STL file (97 KB, 86 × 112 × 110 mm), see it in live 3D inside the turbocharger, or get the whole machine.

Centre housing (CHRA) 3D model from the turbocharger, free STL Open full screen →

Live 3D opens the whole turbocharger with the centre housing (chra) picked out, so you can see where it sits and how it moves. Open it full screen →

Download the centre housing (chra) STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the centre housing (chra)

The centre housing (CHRA: centre housing rotating assembly) carries the shaft in oil-fed journal bearings between the hot turbine and the cool compressor. Engine oil flows in from the top and drains from the bottom; a water jacket keeps it from coking after shutdown.

Oil at 3–4 bar arrives through a banjo bolt; the drain must be gravity-fed and downhill.

Turbo timers exist because oil left standing here at 300 °C turns to carbon.

Key facts

Part ofTurbocharger: Journal-bearing turbo · Ø60 mm compressor · internal wastegate
SystemBearing housing: Centre housing, floating bearings, thrust bearing, oil and coolant connections.
Quantity1
Size86 × 112 × 110 mm (real scale)
Mesh1,932 triangles
MaterialCast iron
Oil feedM10 banjo, 3–4 bar
CoolantWater-cooled jacket
FileSTL, millimetres, Z-up, 97 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the bearing housing

Centre housing, floating bearings, thrust bearing, oil and coolant connections.

Questions about the centre housing (chra) 3D model

Is the centre housing (chra) 3D model free to download?

Yes. The centre housing (chra) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free turbocharger 3D model on Engine-X.

What file format is the centre housing (chra) 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 97 KB with 1,932 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the centre housing (chra)?

Yes. The STL is real scale (86 × 112 × 110 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Centre housing (CHRA) 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Centre housing (CHRA) 3D model (turbocharger) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/turbocharger-centre-housing-chra

All turbocharger parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.