Free part 3D model · STL · Live 3D
Journal bearing (compressor side) 3D model
Part of the turbocharger 3D model · Bearing housing · By Parth Parmar, mechanical design engineer · Updated
A floating journal bearing: a bronze bush that turns at about half shaft speed with oil films on both its inside and its outside. Download the journal bearing (compressor side) free as an STL file (39 KB, 12 × 14 × 14 mm), see it in live 3D inside the turbocharger, or get the whole machine.
Open full screen →
Live 3D opens the whole turbocharger with the journal bearing (compressor side) picked out, so you can see where it sits and how it moves. Open it full screen →
Download the journal bearing (compressor side) STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the journal bearing (compressor side)
A floating journal bearing: a bronze bush that turns at about half shaft speed with oil films on both its inside and its outside. The double film damps shaft whirl that a fixed bush could not.
Key facts
| Part of | Turbocharger: Journal-bearing turbo · Ø60 mm compressor · internal wastegate |
|---|---|
| System | Bearing housing: Centre housing, floating bearings, thrust bearing, oil and coolant connections. |
| Quantity | 1 |
| Size | 12 × 14 × 14 mm (real scale) |
| Mesh | 776 triangles |
| Type | Fully floating bush |
| Material | Leaded bronze |
| Clearance | ≈ 0.02 mm each film |
| File | STL, millimetres, Z-up, 39 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the bearing housing
Centre housing, floating bearings, thrust bearing, oil and coolant connections.
- Centre housing (CHRA)
- Journal bearing (turbine side)
- Thrust bearing
- Seal plate (insert)
- Oil feed banjo bolt
- Oil drain flange
- Coolant port (inlet)
- Coolant port (outlet)
Questions about the journal bearing (compressor side) 3D model
Is the journal bearing (compressor side) 3D model free to download?
Yes. The journal bearing (compressor side) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free turbocharger 3D model on Engine-X.
What file format is the journal bearing (compressor side) 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 39 KB with 776 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the journal bearing (compressor side)?
Yes. The STL is real scale (12 × 14 × 14 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Journal bearing (compressor side) 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Journal bearing (compressor side) 3D model (turbocharger) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/turbocharger-journal-bearing-compressor-side
All turbocharger parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.