Free part 3D model · STL · Live 3D

Wastegate actuator 3D model

Part of the turbocharger 3D model · Boost control · By Parth Parmar, mechanical design engineer · Updated

The wastegate actuator: a spring-loaded diaphragm can. Download the wastegate actuator free as an STL file (49 KB, 48 × 60 × 60 mm), see it in live 3D inside the turbocharger, or get the whole machine.

Wastegate actuator 3D model from the turbocharger, free STL Open full screen →

Live 3D opens the whole turbocharger with the wastegate actuator picked out, so you can see where it sits and how it moves. Open it full screen →

Download the wastegate actuator STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the wastegate actuator

The wastegate actuator: a spring-loaded diaphragm can. Boost pressure from the compressor outlet pushes the diaphragm against the spring; above the set pressure the rod moves and opens the wastegate.

The spring preload sets the base boost; the engine controller bleeds the signal with a solenoid to raise it.

Key facts

Part ofTurbocharger: Journal-bearing turbo · Ø60 mm compressor · internal wastegate
SystemBoost control: Internal wastegate valve, arm, actuator and rod.
Quantity1
Size48 × 60 × 60 mm (real scale)
Mesh972 triangles
TypePneumatic diaphragm
Set point≈ 0.8 bar
FileSTL, millimetres, Z-up, 49 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the boost control

Internal wastegate valve, arm, actuator and rod.

Questions about the wastegate actuator 3D model

Is the wastegate actuator 3D model free to download?

Yes. The wastegate actuator STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free turbocharger 3D model on Engine-X.

What file format is the wastegate actuator 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 49 KB with 972 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the wastegate actuator?

Yes. The STL is real scale (48 × 60 × 60 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Wastegate actuator 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Wastegate actuator 3D model (turbocharger) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/turbocharger-wastegate-actuator

All turbocharger parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.