Free part 3D model · STL · Live 3D

Wastegate valve (flap) 3D model

Part of the turbocharger 3D model · Boost control · By Parth Parmar, mechanical design engineer · Updated

The internal wastegate is a flap valve in the turbine housing that lets exhaust bypass the wheel once boost reaches the target. Download the wastegate valve (flap) free as an STL file (10 KB, 30 × 4 × 30 mm), see it in live 3D inside the turbocharger, or get the whole machine.

Wastegate valve (flap) 3D model from the turbocharger, free STL Open full screen →

Live 3D opens the whole turbocharger with the wastegate valve (flap) picked out, so you can see where it sits and how it moves. Open it full screen →

Download the wastegate valve (flap) STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the wastegate valve (flap)

The internal wastegate is a flap valve in the turbine housing that lets exhaust bypass the wheel once boost reaches the target. Opening it caps turbine power and therefore boost pressure.

Shown cycling open and closed. In service it cracks open only as far as needed to hold the set boost.

Key facts

Part ofTurbocharger: Journal-bearing turbo · Ø60 mm compressor · internal wastegate
SystemBoost control: Internal wastegate valve, arm, actuator and rod.
Quantity1
Size30 × 4 × 30 mm (real scale)
Mesh192 triangles
ValveØ 30 mm poppet
Travel≈ 25°
FileSTL, millimetres, Z-up, 10 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the boost control

Internal wastegate valve, arm, actuator and rod.

Questions about the wastegate valve (flap) 3D model

Is the wastegate valve (flap) 3D model free to download?

Yes. The wastegate valve (flap) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free turbocharger 3D model on Engine-X.

What file format is the wastegate valve (flap) 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 10 KB with 192 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the wastegate valve (flap)?

Yes. The STL is real scale (30 × 4 × 30 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Wastegate valve (flap) 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Wastegate valve (flap) 3D model (turbocharger) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/turbocharger-wastegate-valve-flap

All turbocharger parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.