Free part 3D model · STL · Live 3D

Accessory gearbox 3D model

Part of the turbofan jet engine 3D model · Nacelle & accessories · By Parth Parmar, mechanical design engineer · Updated

The accessory gearbox drives the pumps and generator of the engine from the HP shaft. Download the accessory gearbox free as an STL file (49 KB, 420 × 144 × 209 mm), see it in live 3D inside the turbofan jet engine, or get the whole machine.

Accessory gearbox 3D model from the turbofan jet engine, free STL Open full screen →

Live 3D opens the whole turbofan jet engine with the accessory gearbox picked out, so you can see where it sits and how it moves. Open it full screen →

Download the accessory gearbox STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the accessory gearbox

The accessory gearbox drives the pumps and generator of the engine from the HP shaft. Driven by the HP shaft through the radial drive shaft, it runs the fuel pump, oil pumps, hydraulic pump and electrical generator, and the starter turns the engine through it.

Key facts

Part ofTurbofan jet engine: CFM56-7B style · 61 in fan · two spools · N2 ≈ 2.8 × N1
SystemNacelle & accessories: Inlet, fan case and cowls, reverser cowl, core cowl, accessory gearbox, FADEC and mounts.
Quantity1
Size420 × 144 × 209 mm (real scale)
Mesh972 triangles
FileSTL, millimetres, Z-up, 49 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the nacelle & accessories

Inlet, fan case and cowls, reverser cowl, core cowl, accessory gearbox, FADEC and mounts.

Questions about the accessory gearbox 3D model

Is the accessory gearbox 3D model free to download?

Yes. The accessory gearbox STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free turbofan jet engine 3D model on Engine-X.

What file format is the accessory gearbox 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 49 KB with 972 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the accessory gearbox?

Yes. The STL is real scale (420 × 144 × 209 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Accessory gearbox 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Accessory gearbox 3D model (turbofan jet engine) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/turbofan-engine-accessory-gearbox

All turbofan jet engine parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.