Free part 3D model · STL · Live 3D

Thrust reverser cowl 3D model

Part of the turbofan jet engine 3D model · Nacelle & accessories · By Parth Parmar, mechanical design engineer · Updated

The thrust reverser cowl, the rear part of the nacelle round the bypass duct. Download the thrust reverser cowl free as an STL file (58 KB, 510 × 1768 × 1768 mm), see it in live 3D inside the turbofan jet engine, or get the whole machine.

Thrust reverser cowl 3D model from the turbofan jet engine, free STL Open full screen →

Live 3D opens the whole turbofan jet engine with the thrust reverser cowl picked out, so you can see where it sits and how it moves. Open it full screen →

Download the thrust reverser cowl STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the thrust reverser cowl

The thrust reverser cowl, the rear part of the nacelle round the bypass duct. On landing it slides back and blocker doors turn the bypass air forward through cascades to help slow the aircraft (the reverser internals are not modelled).

Key facts

Part ofTurbofan jet engine: CFM56-7B style · 61 in fan · two spools · N2 ≈ 2.8 × N1
SystemNacelle & accessories: Inlet, fan case and cowls, reverser cowl, core cowl, accessory gearbox, FADEC and mounts.
Quantity1
Size510 × 1768 × 1768 mm (real scale)
Mesh1,152 triangles
FileSTL, millimetres, Z-up, 58 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the nacelle & accessories

Inlet, fan case and cowls, reverser cowl, core cowl, accessory gearbox, FADEC and mounts.

Questions about the thrust reverser cowl 3D model

Is the thrust reverser cowl 3D model free to download?

Yes. The thrust reverser cowl STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free turbofan jet engine 3D model on Engine-X.

What file format is the thrust reverser cowl 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 58 KB with 1,152 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the thrust reverser cowl?

Yes. The STL is real scale (510 × 1768 × 1768 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Thrust reverser cowl 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Thrust reverser cowl 3D model (turbofan jet engine) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/turbofan-engine-thrust-reverser-cowl

All turbofan jet engine parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.