Free part 3D model · STL · Live 3D

Booster rotor stage 3D model

Part of the turbofan jet engine 3D model · Low-pressure spool (N1) · By Parth Parmar, mechanical design engineer · Updated

A booster (low-pressure compressor) rotor stage. Download the booster rotor stage free as an STL file (146 KB, 36 × 884 × 883 mm), see it in live 3D inside the turbofan jet engine, or get the whole machine.

Booster rotor stage 3D model from the turbofan jet engine, free STL Open full screen →

Live 3D opens the whole turbofan jet engine with the booster rotor stage picked out, so you can see where it sits and how it moves. Open it full screen →

Download the booster rotor stage STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the booster rotor stage

A booster (low-pressure compressor) rotor stage. The booster sits right behind the fan on the same low-pressure shaft and gives the core air a first squeeze before the high-pressure compressor.

Three booster stages in the CFM56-7B (EASA TCDS E.004).

Key facts

Part ofTurbofan jet engine: CFM56-7B style · 61 in fan · two spools · N2 ≈ 2.8 × N1
SystemLow-pressure spool (N1): Fan, spinner, booster rotors, LP shaft and the four LP turbine rotors: all turn together.
Quantity3 in the machine
Size36 × 884 × 883 mm (real scale)
Mesh2,928 triangles
SpoolLow pressure (N1)
Stages3
FileSTL, millimetres, Z-up, 146 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the low-pressure spool (n1)

Fan, spinner, booster rotors, LP shaft and the four LP turbine rotors: all turn together.

Questions about the booster rotor stage 3D model

Is the booster rotor stage 3D model free to download?

Yes. The booster rotor stage STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free turbofan jet engine 3D model on Engine-X.

What file format is the booster rotor stage 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 146 KB with 2,928 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the booster rotor stage?

Yes. The STL is real scale (36 × 884 × 883 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Booster rotor stage 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Booster rotor stage 3D model (turbofan jet engine) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/turbofan-engine-booster-rotor-stage

All turbofan jet engine parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.