Free part 3D model · STL · Live 3D

Low-pressure shaft 3D model

Part of the turbofan jet engine 3D model · Low-pressure spool (N1) · By Parth Parmar, mechanical design engineer · Updated

The low-pressure shaft connects the low-pressure turbine at the back to the fan at the front. Download the low-pressure shaft free as an STL file (5 KB, 2080 × 92 × 92 mm), see it in live 3D inside the turbofan jet engine, or get the whole machine.

Low-pressure shaft 3D model from the turbofan jet engine, free STL Open full screen →

Live 3D opens the whole turbofan jet engine with the low-pressure shaft picked out, so you can see where it sits and how it moves. Open it full screen →

Download the low-pressure shaft STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the low-pressure shaft

The low-pressure shaft connects the low-pressure turbine at the back to the fan at the front. It runs the full length of the engine, inside the HP shaft, and drives the fan and booster at up to 5382 rpm.

Key facts

Part ofTurbofan jet engine: CFM56-7B style · 61 in fan · two spools · N2 ≈ 2.8 × N1
SystemLow-pressure spool (N1): Fan, spinner, booster rotors, LP shaft and the four LP turbine rotors: all turn together.
Quantity1
Size2080 × 92 × 92 mm (real scale)
Mesh96 triangles
Max speed5382 rpm
At1005175 rpm
FileSTL, millimetres, Z-up, 5 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the low-pressure spool (n1)

Fan, spinner, booster rotors, LP shaft and the four LP turbine rotors: all turn together.

Questions about the low-pressure shaft 3D model

Is the low-pressure shaft 3D model free to download?

Yes. The low-pressure shaft STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free turbofan jet engine 3D model on Engine-X.

What file format is the low-pressure shaft 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 5 KB with 96 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the low-pressure shaft?

Yes. The STL is real scale (2080 × 92 × 92 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Low-pressure shaft 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Low-pressure shaft 3D model (turbofan jet engine) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/turbofan-engine-low-pressure-shaft

All turbofan jet engine parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.