Free part 3D model · STL · Live 3D

Core exhaust nozzle 3D model

Part of the turbofan jet engine 3D model · Casings, frames & bearings · By Parth Parmar, mechanical design engineer · Updated

The core exhaust nozzle is the rear outlet where the hot core gas leaves the engine. Download the core exhaust nozzle free as an STL file (38 KB, 335 × 988 × 988 mm), see it in live 3D inside the turbofan jet engine, or get the whole machine.

Core exhaust nozzle 3D model from the turbofan jet engine, free STL Open full screen →

Live 3D opens the whole turbofan jet engine with the core exhaust nozzle picked out, so you can see where it sits and how it moves. Open it full screen →

Download the core exhaust nozzle STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the core exhaust nozzle

The core exhaust nozzle is the rear outlet where the hot core gas leaves the engine. The hot core gas leaves here, at a few hundred degrees and high speed; it gives a smaller share of the thrust than the bypass air.

Key facts

Part ofTurbofan jet engine: CFM56-7B style · 61 in fan · two spools · N2 ≈ 2.8 × N1
SystemCasings, frames & bearings: Fan frame, compressor, combustion and turbine cases, rear frame, exhaust, main bearings.
Quantity1
Size335 × 988 × 988 mm (real scale)
Mesh768 triangles
FileSTL, millimetres, Z-up, 38 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the casings, frames & bearings

Fan frame, compressor, combustion and turbine cases, rear frame, exhaust, main bearings.

Questions about the core exhaust nozzle 3D model

Is the core exhaust nozzle 3D model free to download?

Yes. The core exhaust nozzle STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free turbofan jet engine 3D model on Engine-X.

What file format is the core exhaust nozzle 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 38 KB with 768 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the core exhaust nozzle?

Yes. The STL is real scale (335 × 988 × 988 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Core exhaust nozzle 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Core exhaust nozzle 3D model (turbofan jet engine) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/turbofan-engine-core-exhaust-nozzle

All turbofan jet engine parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.