Free part 3D model · STL · Live 3D

Splitter & booster case 3D model

Part of the turbofan jet engine 3D model · Casings, frames & bearings · By Parth Parmar, mechanical design engineer · Updated

The splitter and booster case divides the fan air between the bypass duct and the core. Download the splitter & booster case free as an STL file (58 KB, 450 × 1040 × 1040 mm), see it in live 3D inside the turbofan jet engine, or get the whole machine.

Splitter & booster case 3D model from the turbofan jet engine, free STL Open full screen →

Live 3D opens the whole turbofan jet engine with the splitter & booster case picked out, so you can see where it sits and how it moves. Open it full screen →

Download the splitter & booster case STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the splitter & booster case

The splitter and booster case divides the fan air between the bypass duct and the core. Its sharp front edge divides the air from the fan: the outer part goes down the bypass duct, the inner part into the core. In this engine family that split is about 5 to 1.

Key facts

Part ofTurbofan jet engine: CFM56-7B style · 61 in fan · two spools · N2 ≈ 2.8 × N1
SystemCasings, frames & bearings: Fan frame, compressor, combustion and turbine cases, rear frame, exhaust, main bearings.
Quantity1
Size450 × 1040 × 1040 mm (real scale)
Mesh1,152 triangles
Bypass ratio5.1–5.5
FileSTL, millimetres, Z-up, 58 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the casings, frames & bearings

Fan frame, compressor, combustion and turbine cases, rear frame, exhaust, main bearings.

Questions about the splitter & booster case 3D model

Is the splitter & booster case 3D model free to download?

Yes. The splitter & booster case STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free turbofan jet engine 3D model on Engine-X.

What file format is the splitter & booster case 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 58 KB with 1,152 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the splitter & booster case?

Yes. The STL is real scale (450 × 1040 × 1040 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Splitter & booster case 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Splitter & booster case 3D model (turbofan jet engine) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/turbofan-engine-splitter-booster-case

All turbofan jet engine parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.