Free part 3D model · STL · Live 3D
Driven pulley (Ø250 mm) 3D model
Part of the pulley & belt drive 3D model · Drive train · By Parth Parmar, mechanical design engineer · Updated
The driven pulley, 2.50× the driver's radius. Download the driven pulley (ø250 mm) free as an STL file (45 KB, 34 × 250 × 250 mm), see it in live 3D inside the pulley & belt drive, or get the whole machine.
Open full screen →
Live 3D opens the whole pulley & belt drive with the driven pulley (ø250 mm) picked out, so you can see where it sits and how it moves. Open it full screen →
Download the driven pulley (ø250 mm) STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the driven pulley (ø250 mm)
The driven pulley, 2.50× the driver's radius. Because belt speed is the same all the way round the loop, this pulley turns exactly 2.50× slower than the driver — a plain speed reducer with no gear teeth at all.
Unlike a meshing gear pair, both pulleys turn the same way round. Crossing the belt into a figure-eight is the only way to reverse it.
Key facts
| Part of | Pulley & belt drive: V-belt speed reducer · Ø100/Ø250 mm pulleys · 2.50 : 1 |
|---|---|
| System | Drive train: Driver shaft, driven shaft, both pulleys and the speed-indicator disc. |
| Quantity | 1 |
| Size | 34 × 250 × 250 mm (real scale) |
| Mesh | 896 triangles |
| Radius | 125 mm |
| Ratio | 2.50 : 1 reduction |
| File | STL, millimetres, Z-up, 45 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the drive train
Driver shaft, driven shaft, both pulleys and the speed-indicator disc.
Questions about the driven pulley (ø250 mm) 3D model
Is the driven pulley (ø250 mm) 3D model free to download?
Yes. The driven pulley (ø250 mm) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free pulley & belt drive 3D model on Engine-X.
What file format is the driven pulley (ø250 mm) 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 45 KB with 896 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the driven pulley (ø250 mm)?
Yes. The STL is real scale (34 × 250 × 250 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Driven pulley (Ø250 mm) 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Driven pulley (Ø250 mm) 3D model (pulley & belt drive) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/v-belt-drive-driven-pulley-250-mm
All pulley & belt drive parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.