Free part 3D model · STL · Live 3D

Driver pulley (Ø100 mm) 3D model

Part of the pulley & belt drive 3D model · Drive train · By Parth Parmar, mechanical design engineer · Updated

The driver pulley. Download the driver pulley (ø100 mm) free as an STL file (34 KB, 30 × 100 × 100 mm), see it in live 3D inside the pulley & belt drive, or get the whole machine.

Driver pulley (Ø100 mm) 3D model from the pulley & belt drive, free STL Open full screen →

Live 3D opens the whole pulley & belt drive with the driver pulley (ø100 mm) picked out, so you can see where it sits and how it moves. Open it full screen →

Download the driver pulley (ø100 mm) STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the driver pulley (ø100 mm)

The driver pulley. Its radius is the whole reason a belt drive can change speed at all: the belt must travel the same distance per second at both pulleys, so a small pulley here has to spin faster than a big one downstream.

Key facts

Part ofPulley & belt drive: V-belt speed reducer · Ø100/Ø250 mm pulleys · 2.50 : 1
SystemDrive train: Driver shaft, driven shaft, both pulleys and the speed-indicator disc.
Quantity1
Size30 × 100 × 100 mm (real scale)
Mesh672 triangles
Radius50 mm
GrooveSingle V, A-section
FileSTL, millimetres, Z-up, 34 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the drive train

Driver shaft, driven shaft, both pulleys and the speed-indicator disc.

Questions about the driver pulley (ø100 mm) 3D model

Is the driver pulley (ø100 mm) 3D model free to download?

Yes. The driver pulley (ø100 mm) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free pulley & belt drive 3D model on Engine-X.

What file format is the driver pulley (ø100 mm) 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 34 KB with 672 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the driver pulley (ø100 mm)?

Yes. The STL is real scale (30 × 100 × 100 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Driver pulley (Ø100 mm) 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Driver pulley (Ø100 mm) 3D model (pulley & belt drive) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/v-belt-drive-driver-pulley-100-mm

All pulley & belt drive parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.