Free part 3D model · STL · Live 3D
Motor 3D model
Part of the pulley & belt drive 3D model · Frame & mounts · By Parth Parmar, mechanical design engineer · Updated
The driver: an electric motor. Download the motor free as an STL file (49 KB, 175 × 144 × 144 mm), see it in live 3D inside the pulley & belt drive, or get the whole machine.
Open full screen →
Live 3D opens the whole pulley & belt drive with the motor picked out, so you can see where it sits and how it moves. Open it full screen →
Download the motor STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the motor
The driver: an electric motor. Its shaft turns at a constant speed set by the supply frequency (or by a variable-frequency drive), and that speed is all this whole machine has to work with — everything downstream is a ratio of it.
Key facts
| Part of | Pulley & belt drive: V-belt speed reducer · Ø100/Ø250 mm pulleys · 2.50 : 1 |
|---|---|
| System | Frame & mounts: Base plate, motor, pillow blocks, idler bracket and belt guard. |
| Quantity | 1 |
| Size | 175 × 144 × 144 mm (real scale) |
| Mesh | 972 triangles |
| Power | ≈ 0.37 kW |
| Speed | 1,440 rpm (4-pole, 50 Hz) |
| File | STL, millimetres, Z-up, 49 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the frame & mounts
Base plate, motor, pillow blocks, idler bracket and belt guard.
The same part in other machines
- Motorin the centrifugal pump
Questions about the motor 3D model
Is the motor 3D model free to download?
Yes. The motor STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free pulley & belt drive 3D model on Engine-X.
What file format is the motor 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 49 KB with 972 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the motor?
Yes. The STL is real scale (175 × 144 × 144 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Motor 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Motor 3D model (pulley & belt drive) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/v-belt-drive-motor
All pulley & belt drive parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.