Free part 3D model · STL · Live 3D

Fuel injector 3D model

Part of the car engine 3D model · Ignition & fuel · By Parth Parmar, mechanical design engineer · Updated

A fuel injector sprays petrol into one intake port, aimed at the back of the intake valves. Download the fuel injector free as an STL file (9 KB, 14 × 55 × 37 mm), see it in live 3D inside the car engine, or get the whole machine.

Fuel injector 3D model from the car engine, free STL Open full screen →

Live 3D opens the whole car engine with the fuel injector picked out, so you can see where it sits and how it moves. Open it full screen →

Download the fuel injector STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the fuel injector

A fuel injector sprays petrol into one intake port, aimed at the back of the intake valves. The engine computer opens it for a few milliseconds each cycle and controls the amount of fuel by how long it stays open.

This is port fuel injection; direct-injection engines spray into the cylinder itself at much higher pressure.

Key facts

Part ofCar engine: Inline-4 petrol · 2.0 L · DOHC 16-valve · firing order 1-3-4-2
SystemIgnition & fuel: Spark plugs, coil-on-plug ignition coils, fuel injectors and fuel rail.
Quantity4 in the machine
Size14 × 55 × 37 mm (real scale)
Mesh176 triangles
TypePort fuel injection
Count4
FileSTL, millimetres, Z-up, 9 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the ignition & fuel

Spark plugs, coil-on-plug ignition coils, fuel injectors and fuel rail.

Questions about the fuel injector 3D model

Is the fuel injector 3D model free to download?

Yes. The fuel injector STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free car engine 3D model on Engine-X.

What file format is the fuel injector 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 9 KB with 176 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the fuel injector?

Yes. The STL is real scale (14 × 55 × 37 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Fuel injector 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Fuel injector 3D model (car engine) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/car-engine-fuel-injector

All car engine parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.