Free part 3D model · STL · Live 3D

Spark plug 3D model

Part of the car engine 3D model · Ignition & fuel · By Parth Parmar, mechanical design engineer · Updated

A spark plug fires a spark across its gap to light the compressed fuel-air mixture just before the piston reaches the top of the compression stroke. Download the spark plug free as an STL file (9 KB, 14 × 69 × 16 mm), see it in live 3D inside the car engine, or get the whole machine.

Spark plug 3D model from the car engine, free STL Open full screen →

Live 3D opens the whole car engine with the spark plug picked out, so you can see where it sits and how it moves. Open it full screen →

Download the spark plug STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the spark plug

A spark plug fires a spark across its gap to light the compressed fuel-air mixture just before the piston reaches the top of the compression stroke. This engine has one per cylinder, in the centre of the combustion chamber.

Typical gaps are around 0.7 to 1.1 mm; iridium or platinum tips last up to about 100,000 km.

Key facts

Part ofCar engine: Inline-4 petrol · 2.0 L · DOHC 16-valve · firing order 1-3-4-2
SystemIgnition & fuel: Spark plugs, coil-on-plug ignition coils, fuel injectors and fuel rail.
Quantity4 in the machine
Size14 × 69 × 16 mm (real scale)
Mesh184 triangles
Count4
Firing order1-3-4-2
FileSTL, millimetres, Z-up, 9 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the ignition & fuel

Spark plugs, coil-on-plug ignition coils, fuel injectors and fuel rail.

Questions about the spark plug 3D model

Is the spark plug 3D model free to download?

Yes. The spark plug STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free car engine 3D model on Engine-X.

What file format is the spark plug 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 9 KB with 184 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the spark plug?

Yes. The STL is real scale (14 × 69 × 16 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Spark plug 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Spark plug 3D model (car engine) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/car-engine-spark-plug

All car engine parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.