Free part 3D model · STL · Live 3D

Ignition coil 3D model

Part of the car engine 3D model · Ignition & fuel · By Parth Parmar, mechanical design engineer · Updated

An ignition coil sits directly on top of each spark plug (coil-on-plug). Download the ignition coil free as an STL file (63 KB, 34 × 123 × 67 mm), see it in live 3D inside the car engine, or get the whole machine.

Ignition coil 3D model from the car engine, free STL Open full screen →

Live 3D opens the whole car engine with the ignition coil picked out, so you can see where it sits and how it moves. Open it full screen →

Download the ignition coil STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the ignition coil

An ignition coil sits directly on top of each spark plug (coil-on-plug). The engine computer switches its primary current off, and the collapsing magnetic field makes the tens of thousands of volts the plug needs to spark.

A misfire that moves when a coil is swapped to another cylinder shows the coil is the faulty part.

Key facts

Part ofCar engine: Inline-4 petrol · 2.0 L · DOHC 16-valve · firing order 1-3-4-2
SystemIgnition & fuel: Spark plugs, coil-on-plug ignition coils, fuel injectors and fuel rail.
Quantity4 in the machine
Size34 × 123 × 67 mm (real scale)
Mesh1,256 triangles
TypeCoil-on-plug
FileSTL, millimetres, Z-up, 63 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the ignition & fuel

Spark plugs, coil-on-plug ignition coils, fuel injectors and fuel rail.

Questions about the ignition coil 3D model

Is the ignition coil 3D model free to download?

Yes. The ignition coil STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free car engine 3D model on Engine-X.

What file format is the ignition coil 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 63 KB with 1,256 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the ignition coil?

Yes. The STL is real scale (34 × 123 × 67 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Ignition coil 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Ignition coil 3D model (car engine) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/car-engine-ignition-coil

All car engine parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.