Free part 3D model · STL · Live 3D

Impeller blade 3D model

Part of the centrifugal pump 3D model · Rotating group · By Parth Parmar, mechanical design engineer · Updated

One of 6 backward-curved vanes. Download the impeller blade free as an STL file (24 KB, 30 × 65 × 78 mm), see it in live 3D inside the centrifugal pump, or get the whole machine.

Impeller blade 3D model from the centrifugal pump, free STL Open full screen →

Live 3D opens the whole centrifugal pump with the impeller blade picked out, so you can see where it sits and how it moves. Open it full screen →

Download the impeller blade STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the impeller blade

One of 6 backward-curved vanes. Backward curvature — the blade leans away from the direction of rotation at the tip — gives the flattest, most stable head-flow curve of any impeller shape, which is why it's the default choice for a general-purpose pump.

Key facts

Part ofCentrifugal pump: Single-stage end-suction · Ø164 mm impeller · 6 backward-curved vanes
SystemRotating group: Shaft, coupling, impeller (hub, shroud and blades) and the rotating seal ring.
Quantity6 in the machine
Size30 × 65 × 78 mm (real scale)
Mesh476 triangles
Count6
TypeBackward-curved
FileSTL, millimetres, Z-up, 24 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the rotating group

Shaft, coupling, impeller (hub, shroud and blades) and the rotating seal ring.

Questions about the impeller blade 3D model

Is the impeller blade 3D model free to download?

Yes. The impeller blade STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free centrifugal pump 3D model on Engine-X.

What file format is the impeller blade 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 24 KB with 476 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the impeller blade?

Yes. The STL is real scale (30 × 65 × 78 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Impeller blade 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Impeller blade 3D model (centrifugal pump) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/centrifugal-pump-impeller-blade

All centrifugal pump parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.