Free part 3D model · STL · Live 3D

Mechanical seal (rotating ring) 3D model

Part of the centrifugal pump 3D model · Rotating group · By Parth Parmar, mechanical design engineer · Updated

The rotating half of the mechanical seal, spring-loaded against the stationary seat behind it. Download the mechanical seal (rotating ring) free as an STL file (39 KB, 8 × 44 × 44 mm), see it in live 3D inside the centrifugal pump, or get the whole machine.

Mechanical seal (rotating ring) 3D model from the centrifugal pump, free STL Open full screen →

Live 3D opens the whole centrifugal pump with the mechanical seal (rotating ring) picked out, so you can see where it sits and how it moves. Open it full screen →

Download the mechanical seal (rotating ring) STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the mechanical seal (rotating ring)

The rotating half of the mechanical seal, spring-loaded against the stationary seat behind it. Together the two lapped faces — one spinning, one fixed — stop pressurized liquid from leaking out along the shaft, the classic failure point of any pump.

Key facts

Part ofCentrifugal pump: Single-stage end-suction · Ø164 mm impeller · 6 backward-curved vanes
SystemRotating group: Shaft, coupling, impeller (hub, shroud and blades) and the rotating seal ring.
Quantity1
Size8 × 44 × 44 mm (real scale)
Mesh776 triangles
FaceCarbon vs. ceramic
FileSTL, millimetres, Z-up, 39 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the rotating group

Shaft, coupling, impeller (hub, shroud and blades) and the rotating seal ring.

Questions about the mechanical seal (rotating ring) 3D model

Is the mechanical seal (rotating ring) 3D model free to download?

Yes. The mechanical seal (rotating ring) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free centrifugal pump 3D model on Engine-X.

What file format is the mechanical seal (rotating ring) 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 39 KB with 776 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the mechanical seal (rotating ring)?

Yes. The STL is real scale (8 × 44 × 44 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Mechanical seal (rotating ring) 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Mechanical seal (rotating ring) 3D model (centrifugal pump) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/centrifugal-pump-mechanical-seal-rotating-ring

All centrifugal pump parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.