Free part 3D model · STL · Live 3D
Impeller front shroud 3D model
Part of the centrifugal pump 3D model · Rotating group · By Parth Parmar, mechanical design engineer · Updated
The impeller's front shroud, closing the blade passages on the inlet side except for the central eye. Download the impeller front shroud free as an STL file (39 KB, 5 × 152 × 152 mm), see it in live 3D inside the centrifugal pump, or get the whole machine.
Open full screen →
Live 3D opens the whole centrifugal pump with the impeller front shroud picked out, so you can see where it sits and how it moves. Open it full screen →
Download the impeller front shroud STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the impeller front shroud
The impeller's front shroud, closing the blade passages on the inlet side except for the central eye. A shrouded (closed) impeller like this one runs more efficiently than an open one, at the cost of being harder to clear if it clogs.
Key facts
| Part of | Centrifugal pump: Single-stage end-suction · Ø164 mm impeller · 6 backward-curved vanes |
|---|---|
| System | Rotating group: Shaft, coupling, impeller (hub, shroud and blades) and the rotating seal ring. |
| Quantity | 1 |
| Size | 5 × 152 × 152 mm (real scale) |
| Mesh | 776 triangles |
| File | STL, millimetres, Z-up, 39 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the rotating group
Shaft, coupling, impeller (hub, shroud and blades) and the rotating seal ring.
Questions about the impeller front shroud 3D model
Is the impeller front shroud 3D model free to download?
Yes. The impeller front shroud STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free centrifugal pump 3D model on Engine-X.
What file format is the impeller front shroud 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 39 KB with 776 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the impeller front shroud?
Yes. The STL is real scale (5 × 152 × 152 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Impeller front shroud 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Impeller front shroud 3D model (centrifugal pump) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/centrifugal-pump-impeller-front-shroud
All centrifugal pump parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.