Free part 3D model · STL · Live 3D

1st gear drive gear (12 teeth) 3D model

Part of the manual gearbox 3D model · Input shaft & drive gears · By Parth Parmar, mechanical design engineer · Updated

The 1st gear drive gear sits on the input shaft and has 12 helical teeth. Download the 1st gear drive gear (12 teeth) free as an STL file (126 KB, 18 × 32 × 32 mm), see it in live 3D inside the manual gearbox, or get the whole machine.

1st gear drive gear (12 teeth) 3D model from the manual gearbox, free STL Open full screen →

Live 3D opens the whole manual gearbox with the 1st gear drive gear (12 teeth) picked out, so you can see where it sits and how it moves. Open it full screen →

Download the 1st gear drive gear (12 teeth) STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the 1st gear drive gear (12 teeth)

The 1st gear drive gear sits on the input shaft and has 12 helical teeth. It is always in mesh with the 50-tooth driven gear on the output shaft, giving 50 : 12 = 4.167 : 1.

It is fixed to the input shaft, so it always turns at engine speed.

Key facts

Part ofManual gearbox: 5-speed manual transaxle · two-shaft · synchromesh · 1st 4.17 to 5th 0.85
SystemInput shaft & drive gears: Input shaft from the clutch with the five drive gears.
Quantity1
Size18 × 32 × 32 mm (real scale)
Mesh2,516 triangles
Teeth12
Ratio4.167 : 1
TypeHelical, constant mesh
FileSTL, millimetres, Z-up, 126 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the input shaft & drive gears

Input shaft from the clutch with the five drive gears.

Questions about the 1st gear drive gear (12 teeth) 3D model

Is the 1st gear drive gear (12 teeth) 3D model free to download?

Yes. The 1st gear drive gear (12 teeth) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free manual gearbox 3D model on Engine-X.

What file format is the 1st gear drive gear (12 teeth) 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 126 KB with 2,516 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the 1st gear drive gear (12 teeth)?

Yes. The STL is real scale (18 × 32 × 32 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: 1st gear drive gear (12 teeth) 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). 1st gear drive gear (12 teeth) 3D model (manual gearbox) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/manual-gearbox-1st-gear-drive-gear-12-teeth

All manual gearbox parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.