Free part 3D model · STL · Live 3D
2nd gear drive gear (20 teeth) 3D model
Part of the manual gearbox 3D model · Input shaft & drive gears · By Parth Parmar, mechanical design engineer · Updated
The 2nd gear drive gear sits on the input shaft and has 20 helical teeth. Download the 2nd gear drive gear (20 teeth) free as an STL file (210 KB, 16 × 47 × 47 mm), see it in live 3D inside the manual gearbox, or get the whole machine.
Open full screen →
Live 3D opens the whole manual gearbox with the 2nd gear drive gear (20 teeth) picked out, so you can see where it sits and how it moves. Open it full screen →
Download the 2nd gear drive gear (20 teeth) STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the 2nd gear drive gear (20 teeth)
The 2nd gear drive gear sits on the input shaft and has 20 helical teeth. It is always in mesh with the 46-tooth driven gear on the output shaft, giving 46 : 20 = 2.300 : 1.
It is fixed to the input shaft, so it always turns at engine speed.
Key facts
| Part of | Manual gearbox: 5-speed manual transaxle · two-shaft · synchromesh · 1st 4.17 to 5th 0.85 |
|---|---|
| System | Input shaft & drive gears: Input shaft from the clutch with the five drive gears. |
| Quantity | 1 |
| Size | 16 × 47 × 47 mm (real scale) |
| Mesh | 4,196 triangles |
| Teeth | 20 |
| Ratio | 2.300 : 1 |
| Type | Helical, constant mesh |
| File | STL, millimetres, Z-up, 210 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the input shaft & drive gears
Input shaft from the clutch with the five drive gears.
- Input shaft
- 1st gear drive gear (12 teeth)
- 3rd gear drive gear (30 teeth)
- 4th gear drive gear (38 teeth)
- 5th gear drive gear (47 teeth)
Questions about the 2nd gear drive gear (20 teeth) 3D model
Is the 2nd gear drive gear (20 teeth) 3D model free to download?
Yes. The 2nd gear drive gear (20 teeth) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free manual gearbox 3D model on Engine-X.
What file format is the 2nd gear drive gear (20 teeth) 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 210 KB with 4,196 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the 2nd gear drive gear (20 teeth)?
Yes. The STL is real scale (16 × 47 × 47 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: 2nd gear drive gear (20 teeth) 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). 2nd gear drive gear (20 teeth) 3D model (manual gearbox) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/manual-gearbox-2nd-gear-drive-gear-20-teeth
All manual gearbox parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.