Free part 3D model · STL · Live 3D

Input shaft 3D model

Part of the manual gearbox 3D model · Input shaft & drive gears · By Parth Parmar, mechanical design engineer · Updated

The input shaft takes the engine's turning force from the clutch disc on its splined front end. Download the input shaft free as an STL file (20 KB, 397 × 28 × 28 mm), see it in live 3D inside the manual gearbox, or get the whole machine.

Input shaft 3D model from the manual gearbox, free STL Open full screen →

Live 3D opens the whole manual gearbox with the input shaft picked out, so you can see where it sits and how it moves. Open it full screen →

Download the input shaft STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the input shaft

The input shaft takes the engine's turning force from the clutch disc on its splined front end. It carries the five drive gears: 1st and 2nd are fixed to it, while 3rd, 4th and 5th spin freely on it until a synchroniser locks one of them on.

It turns at engine speed whenever the clutch is engaged, whichever gear is selected.

Key facts

Part ofManual gearbox: 5-speed manual transaxle · two-shaft · synchromesh · 1st 4.17 to 5th 0.85
SystemInput shaft & drive gears: Input shaft from the clutch with the five drive gears.
Quantity1
Size397 × 28 × 28 mm (real scale)
Mesh408 triangles
Carries5 drive gears + reverse
MaterialCase-hardened steel
FileSTL, millimetres, Z-up, 20 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the input shaft & drive gears

Input shaft from the clutch with the five drive gears.

The same part in other machines

Questions about the input shaft 3D model

Is the input shaft 3D model free to download?

Yes. The input shaft STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free manual gearbox 3D model on Engine-X.

What file format is the input shaft 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 20 KB with 408 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the input shaft?

Yes. The STL is real scale (397 × 28 × 28 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Input shaft 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Input shaft 3D model (manual gearbox) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/manual-gearbox-input-shaft

All manual gearbox parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.