Free part 3D model · STL · Live 3D

Piston 3D model

Part of the marine diesel engine 3D model · Crank train · By Parth Parmar, mechanical design engineer · Updated

A piston. Download the piston free as an STL file (48 KB, 141 × 160 × 141 mm), see it in live 3D inside the marine diesel engine, or get the whole machine.

Piston 3D model from the marine diesel engine, free STL Open full screen →

Live 3D opens the whole marine diesel engine with the piston picked out, so you can see where it sits and how it moves. Open it full screen →

Download the piston STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the piston

A piston. Diesel fuel sprays into the bowl in its crown, where the air is hottest. The rings seal the combustion gas above and scrape the oil below.

Bore 140 mm: at 1800 rpm the mean piston speed is about 9.1 m/s.

Key facts

Part ofMarine diesel engine: Inline-6 · NT855 Big Cam style · 14 L · PT fuel system
SystemCrank train: Crankshaft, pistons, connecting rods, flywheel and damper.
Quantity6 in the machine
Size141 × 160 × 141 mm (real scale)
Mesh960 triangles
Diameter140 mm
Rings2 compression + 1 oil
FileSTL, millimetres, Z-up, 48 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the crank train

Crankshaft, pistons, connecting rods, flywheel and damper.

The same part in other machines

Questions about the piston 3D model

Is the piston 3D model free to download?

Yes. The piston STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free marine diesel engine 3D model on Engine-X.

What file format is the piston 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 48 KB with 960 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the piston?

Yes. The STL is real scale (141 × 160 × 141 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Piston 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Piston 3D model (marine diesel engine) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/marine-diesel-engine-piston

All marine diesel engine parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.