Free part 3D model · STL · Live 3D
Piston 3D model
Part of the car engine 3D model · Crank train · By Parth Parmar, mechanical design engineer · Updated
A piston slides in its 86 mm cylinder and takes the push of the burning fuel-air mixture on its crown. Download the piston free as an STL file (54 KB, 87 × 58 × 87 mm), see it in live 3D inside the car engine, or get the whole machine.
Open full screen →
Live 3D opens the whole car engine with the piston picked out, so you can see where it sits and how it moves. Open it full screen →
Download the piston STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the piston
A piston slides in its 86 mm cylinder and takes the push of the burning fuel-air mixture on its crown. Three rings seal it to the bore: two compression rings hold the gas above, and an oil control ring scrapes the oil off the wall below.
At 7,000 rpm the mean piston speed is about 20.1 m/s, and each piston stops and reverses direction 233 times a second.
Valve reliefs cut into the crown give the open valves room near the top of the stroke.
Key facts
| Part of | Car engine: Inline-4 petrol · 2.0 L · DOHC 16-valve · firing order 1-3-4-2 |
|---|---|
| System | Crank train: Crankshaft, four pistons, connecting rods, flywheel, crank sprocket and pulley. |
| Quantity | 4 in the machine |
| Size | 87 × 58 × 87 mm (real scale) |
| Mesh | 1,088 triangles |
| Diameter | 86 mm |
| Rings | 2 compression + 1 oil |
| Material | Cast or forged aluminium |
| File | STL, millimetres, Z-up, 54 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the crank train
Crankshaft, four pistons, connecting rods, flywheel, crank sprocket and pulley.
The same part in other machines
- Pistonin the marine diesel engine
Questions about the piston 3D model
Is the piston 3D model free to download?
Yes. The piston STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free car engine 3D model on Engine-X.
What file format is the piston 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 54 KB with 1,088 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the piston?
Yes. The STL is real scale (87 × 58 × 87 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Piston 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Piston 3D model (car engine) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/car-engine-piston
All car engine parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.