Free part 3D model · STL · Live 3D
Crankshaft 3D model
Part of the car engine 3D model · Crank train · By Parth Parmar, mechanical design engineer · Updated
The crankshaft turns the up-and-down motion of the four pistons into rotation. Download the crankshaft free as an STL file (498 KB, 493 × 142 × 132 mm), see it in live 3D inside the car engine, or get the whole machine.
Open full screen →
Live 3D opens the whole car engine with the crankshaft picked out, so you can see where it sits and how it moves. Open it full screen →
Download the crankshaft STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the crankshaft
The crankshaft turns the up-and-down motion of the four pistons into rotation. Its four throws sit at 180°: throws 1 and 4 point one way, 2 and 3 the other, so two pistons rise while two fall and a cylinder fires every half turn.
The 86 mm stroke is twice the crank throw radius of 43 mm.
Counterweights opposite each throw balance the rotating mass of the crankpins and rod big ends.
An inline-four is not fully balanced: a shake at twice crank speed remains, so larger fours often add two balance shafts.
Key facts
| Part of | Car engine: Inline-4 petrol · 2.0 L · DOHC 16-valve · firing order 1-3-4-2 |
|---|---|
| System | Crank train: Crankshaft, four pistons, connecting rods, flywheel, crank sprocket and pulley. |
| Quantity | 1 |
| Size | 493 × 142 × 132 mm (real scale) |
| Mesh | 9,952 triangles |
| Stroke | 86 mm |
| Throws | 4, at 180° |
| Mains | 5 |
| Material | Forged steel |
| File | STL, millimetres, Z-up, 498 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the crank train
Crankshaft, four pistons, connecting rods, flywheel, crank sprocket and pulley.
The same part in other machines
- Crankshaftin the marine diesel engine
- Crankshaftin the reciprocating air compressor
Questions about the crankshaft 3D model
Is the crankshaft 3D model free to download?
Yes. The crankshaft STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free car engine 3D model on Engine-X.
What file format is the crankshaft 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 498 KB with 9,952 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the crankshaft?
Yes. The STL is real scale (493 × 142 × 132 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Crankshaft 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Crankshaft 3D model (car engine) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/car-engine-crankshaft
All car engine parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.