Free part 3D model · STL · Live 3D

Connecting rod 3D model

Part of the car engine 3D model · Crank train · By Parth Parmar, mechanical design engineer · Updated

A connecting rod links one piston to its crankpin, about 140 mm between centres in this model. Download the connecting rod free as an STL file (37 KB, 22 × 191 × 84 mm), see it in live 3D inside the car engine, or get the whole machine.

Connecting rod 3D model from the car engine, free STL Open full screen →

Live 3D opens the whole car engine with the connecting rod picked out, so you can see where it sits and how it moves. Open it full screen →

Download the connecting rod STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the connecting rod

A connecting rod links one piston to its crankpin, about 140 mm between centres in this model. It pushes the crank round on the power stroke and pulls the piston back down on the intake stroke, so it works in both compression and tension.

The big end is split so it can be bolted round the crankpin over a pair of plain bearing shells.

Key facts

Part ofCar engine: Inline-4 petrol · 2.0 L · DOHC 16-valve · firing order 1-3-4-2
SystemCrank train: Crankshaft, four pistons, connecting rods, flywheel, crank sprocket and pulley.
Quantity4 in the machine
Size22 × 191 × 84 mm (real scale)
Mesh744 triangles
Length140 mm c-c (model)
MaterialForged steel
FileSTL, millimetres, Z-up, 37 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the crank train

Crankshaft, four pistons, connecting rods, flywheel, crank sprocket and pulley.

The same part in other machines

Questions about the connecting rod 3D model

Is the connecting rod 3D model free to download?

Yes. The connecting rod STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free car engine 3D model on Engine-X.

What file format is the connecting rod 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 37 KB with 744 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the connecting rod?

Yes. The STL is real scale (22 × 191 × 84 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Connecting rod 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Connecting rod 3D model (car engine) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/car-engine-connecting-rod

All car engine parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.