Free part 3D model · STL · Live 3D

Flywheel 3D model

Part of the car engine 3D model · Crank train · By Parth Parmar, mechanical design engineer · Updated

The flywheel bolts to the rear of the crankshaft. Download the flywheel free as an STL file (323 KB, 19 × 274 × 274 mm), see it in live 3D inside the car engine, or get the whole machine.

Flywheel 3D model from the car engine, free STL Open full screen →

Live 3D opens the whole car engine with the flywheel picked out, so you can see where it sits and how it moves. Open it full screen →

Download the flywheel STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the flywheel

The flywheel bolts to the rear of the crankshaft. Its mass smooths out the four power pulses per two turns, it carries the clutch (or a flexplate for an automatic) and its toothed ring gear is what the starter motor turns.

Key facts

Part ofCar engine: Inline-4 petrol · 2.0 L · DOHC 16-valve · firing order 1-3-4-2
SystemCrank train: Crankshaft, four pistons, connecting rods, flywheel, crank sprocket and pulley.
Quantity1
Size19 × 274 × 274 mm (real scale)
Mesh6,460 triangles
FileSTL, millimetres, Z-up, 323 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the crank train

Crankshaft, four pistons, connecting rods, flywheel, crank sprocket and pulley.

The same part in other machines

Questions about the flywheel 3D model

Is the flywheel 3D model free to download?

Yes. The flywheel STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free car engine 3D model on Engine-X.

What file format is the flywheel 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 323 KB with 6,460 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the flywheel?

Yes. The STL is real scale (19 × 274 × 274 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Flywheel 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Flywheel 3D model (car engine) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/car-engine-flywheel

All car engine parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.