Free part 3D model · STL · Live 3D
Crankshaft 3D model
Part of the marine diesel engine 3D model · Crank train · By Parth Parmar, mechanical design engineer · Updated
The crankshaft. Download the crankshaft free as an STL file (754 KB, 1260 × 239 × 267 mm), see it in live 3D inside the marine diesel engine, or get the whole machine.
Open full screen →
Live 3D opens the whole marine diesel engine with the crankshaft picked out, so you can see where it sits and how it moves. Open it full screen →
Download the crankshaft STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the crankshaft
The crankshaft. Six throws turn the pistons' up-and-down motion into rotation. Throws 1 and 6, 2 and 5, 3 and 4 share a direction, 120° apart, so a cylinder fires every 120° of rotation.
Counterweights opposite each throw balance the rotating mass. An inline six is naturally in balance, so it needs no balance shafts.
Seven main journals: one between every pair of cylinders and one at each end.
Key facts
| Part of | Marine diesel engine: Inline-6 · NT855 Big Cam style · 14 L · PT fuel system |
|---|---|
| System | Crank train: Crankshaft, pistons, connecting rods, flywheel and damper. |
| Quantity | 1 |
| Size | 1260 × 239 × 267 mm (real scale) |
| Mesh | 15,088 triangles |
| Stroke | 152 mm |
| Throws | 6, at 120° |
| Mains | 7 |
| File | STL, millimetres, Z-up, 754 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the crank train
Crankshaft, pistons, connecting rods, flywheel and damper.
The same part in other machines
- Crankshaftin the reciprocating air compressor
- Crankshaftin the car engine
Questions about the crankshaft 3D model
Is the crankshaft 3D model free to download?
Yes. The crankshaft STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free marine diesel engine 3D model on Engine-X.
What file format is the crankshaft 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 754 KB with 15,088 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the crankshaft?
Yes. The STL is real scale (1260 × 239 × 267 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Crankshaft 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Crankshaft 3D model (marine diesel engine) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/marine-diesel-engine-crankshaft
All marine diesel engine parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.