Free part 3D model · STL · Live 3D

Crankshaft 3D model

Part of the reciprocating air compressor 3D model · Crank train · By Parth Parmar, mechanical design engineer · Updated

The crankshaft turns the motor's rotation into the pistons' up-and-down strokes. Download the crankshaft free as an STL file (132 KB, 273 × 115 × 128 mm), see it in live 3D inside the reciprocating air compressor, or get the whole machine.

Crankshaft 3D model from the reciprocating air compressor, free STL Open full screen →

Live 3D opens the whole reciprocating air compressor with the crankshaft picked out, so you can see where it sits and how it moves. Open it full screen →

Download the crankshaft STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the crankshaft

The crankshaft turns the motor's rotation into the pistons' up-and-down strokes. One crankpin carries both connecting rods side by side, so the two cylinders, set 90° apart, take their strokes a quarter turn apart. It turns at about 900 rpm, 3.2 times slower than the motor.

The counterweight opposite the crankpin balances the rotating mass of the pin and the rod big ends.

Key facts

Part ofReciprocating air compressor: Two-stage V-twin · 12 bar (175 psi) · 3.7 kW
SystemCrank train: Crankshaft, main bearings, two connecting rods, pistons and pins.
Quantity1
Size273 × 115 × 128 mm (real scale)
Mesh2,648 triangles
Stroke70 mm
Speed≈ 900 rpm
MaterialDuctile iron
FileSTL, millimetres, Z-up, 132 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the crank train

Crankshaft, main bearings, two connecting rods, pistons and pins.

The same part in other machines

Questions about the crankshaft 3D model

Is the crankshaft 3D model free to download?

Yes. The crankshaft STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free reciprocating air compressor 3D model on Engine-X.

What file format is the crankshaft 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 132 KB with 2,648 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the crankshaft?

Yes. The STL is real scale (273 × 115 × 128 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Crankshaft 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Crankshaft 3D model (reciprocating air compressor) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/reciprocating-air-compressor-crankshaft

All reciprocating air compressor parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.