Free part 3D model · STL · Live 3D

LP piston (Ø100 mm) 3D model

Part of the reciprocating air compressor 3D model · Crank train · By Parth Parmar, mechanical design engineer · Updated

The low-pressure (first-stage) piston, 100 mm across. Download the lp piston (ø100 mm) free as an STL file (48 KB, 102 × 119 × 119 mm), see it in live 3D inside the reciprocating air compressor, or get the whole machine.

LP piston (Ø100 mm) 3D model from the reciprocating air compressor, free STL Open full screen →

Live 3D opens the whole reciprocating air compressor with the lp piston (ø100 mm) picked out, so you can see where it sits and how it moves. Open it full screen →

Download the lp piston (ø100 mm) STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the lp piston (ø100 mm)

The low-pressure (first-stage) piston, 100 mm across. On its downstroke it draws in outside air through the filter; on its upstroke it squeezes that air to about 2.6 bar and pushes it into the intercooler.

Two compression rings seal the air above; the lower oil ring scrapes oil back down the wall so little reaches the air.

Key facts

Part ofReciprocating air compressor: Two-stage V-twin · 12 bar (175 psi) · 3.7 kW
SystemCrank train: Crankshaft, main bearings, two connecting rods, pistons and pins.
Quantity1
Size102 × 119 × 119 mm (real scale)
Mesh960 triangles
Diameter100 mm
MaterialAluminium alloy
Rings2 compression + 1 oil
FileSTL, millimetres, Z-up, 48 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the crank train

Crankshaft, main bearings, two connecting rods, pistons and pins.

Questions about the lp piston (ø100 mm) 3D model

Is the lp piston (ø100 mm) 3D model free to download?

Yes. The lp piston (ø100 mm) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free reciprocating air compressor 3D model on Engine-X.

What file format is the lp piston (ø100 mm) 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 48 KB with 960 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the lp piston (ø100 mm)?

Yes. The STL is real scale (102 × 119 × 119 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: LP piston (Ø100 mm) 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). LP piston (Ø100 mm) 3D model (reciprocating air compressor) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/reciprocating-air-compressor-lp-piston-100-mm

All reciprocating air compressor parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.