Free part 3D model · STL · Live 3D
HP piston (Ø53 mm) 3D model
Part of the reciprocating air compressor 3D model · Crank train · By Parth Parmar, mechanical design engineer · Updated
The high-pressure (second-stage) piston, only 53 mm across. Download the hp piston (ø53 mm) free as an STL file (48 KB, 55 × 86 × 86 mm), see it in live 3D inside the reciprocating air compressor, or get the whole machine.
Open full screen →
Live 3D opens the whole reciprocating air compressor with the hp piston (ø53 mm) picked out, so you can see where it sits and how it moves. Open it full screen →
Download the hp piston (ø53 mm) STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the hp piston (ø53 mm)
The high-pressure (second-stage) piston, only 53 mm across. It takes the already-compressed, cooled air from the intercooler and squeezes it again, up to 12 bar (175 psi), for the tank.
With equal strokes, the bore ratio follows the stage pressure ratio: 53 ÷ 100 ≈ 1 ÷ √3.6.
Key facts
| Part of | Reciprocating air compressor: Two-stage V-twin · 12 bar (175 psi) · 3.7 kW |
|---|---|
| System | Crank train: Crankshaft, main bearings, two connecting rods, pistons and pins. |
| Quantity | 1 |
| Size | 55 × 86 × 86 mm (real scale) |
| Mesh | 960 triangles |
| Diameter | 53 mm |
| Material | Aluminium alloy |
| File | STL, millimetres, Z-up, 48 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the crank train
Crankshaft, main bearings, two connecting rods, pistons and pins.
- Crankshaft
- Main bearing
- LP piston (Ø100 mm)
- LP piston pin
- LP connecting rod
- HP piston pin
- HP connecting rod
Questions about the hp piston (ø53 mm) 3D model
Is the hp piston (ø53 mm) 3D model free to download?
Yes. The hp piston (ø53 mm) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free reciprocating air compressor 3D model on Engine-X.
What file format is the hp piston (ø53 mm) 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 48 KB with 960 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the hp piston (ø53 mm)?
Yes. The STL is real scale (55 × 86 × 86 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: HP piston (Ø53 mm) 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). HP piston (Ø53 mm) 3D model (reciprocating air compressor) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/reciprocating-air-compressor-hp-piston-53-mm
All reciprocating air compressor parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.