Free part 3D model · STL · Live 3D
Compressor wheel (hub) 3D model
Part of the turbocharger 3D model · Rotating group · By Parth Parmar, mechanical design engineer · Updated
The compressor wheel draws air in axially at the inducer and flings it outward at the exducer. Download the compressor wheel (hub) free as an STL file (102 KB, 37 × 60 × 60 mm), see it in live 3D inside the turbocharger, or get the whole machine.
Open full screen →
Live 3D opens the whole turbocharger with the compressor wheel (hub) picked out, so you can see where it sits and how it moves. Open it full screen →
Download the compressor wheel (hub) STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the compressor wheel (hub)
The compressor wheel draws air in axially at the inducer and flings it outward at the exducer. Its blades accelerate the air to over 300 m/s; the diffuser and scroll turn that speed into pressure.
Machined from a forged aluminum billet or cast; some are titanium for high boost.
Tip speed at 150,000 rpm and 60 mm diameter is 470 m/s, above the speed of sound in the surrounding air.
Six main blades and six splitters: the splitters start further in so the inlet is not choked.
Key facts
| Part of | Turbocharger: Journal-bearing turbo · Ø60 mm compressor · internal wastegate |
|---|---|
| System | Rotating group: Shaft, compressor wheel, turbine wheel, nut, collar and seal rings: everything that spins. |
| Quantity | 1 |
| Size | 37 × 60 × 60 mm (real scale) |
| Mesh | 2,048 triangles |
| Inducer | Ø47 mm |
| Exducer | Ø60 mm |
| Blades | 6 + 6 splitter |
| Material | Forged 2618 aluminum |
| File | STL, millimetres, Z-up, 102 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the rotating group
Shaft, compressor wheel, turbine wheel, nut, collar and seal rings: everything that spins.
- Turbine shaft
- Compressor blade
- Splitter blade
- Compressor nut
- Turbine wheel (hub)
- Turbine blade
- Thrust collar & oil slinger
- Piston-ring seal (compressor side)
- Piston-ring seal (turbine side)
Questions about the compressor wheel (hub) 3D model
Is the compressor wheel (hub) 3D model free to download?
Yes. The compressor wheel (hub) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free turbocharger 3D model on Engine-X.
What file format is the compressor wheel (hub) 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 102 KB with 2,048 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the compressor wheel (hub)?
Yes. The STL is real scale (37 × 60 × 60 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Compressor wheel (hub) 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Compressor wheel (hub) 3D model (turbocharger) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/turbocharger-compressor-wheel-hub
All turbocharger parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.