Free part 3D model · STL · Live 3D

Turbine wheel (hub) 3D model

Part of the turbocharger 3D model · Rotating group · By Parth Parmar, mechanical design engineer · Updated

The turbine wheel is spun by exhaust gas at up to 950 °C. Download the turbine wheel (hub) free as an STL file (115 KB, 40 × 56 × 56 mm), see it in live 3D inside the turbocharger, or get the whole machine.

Turbine wheel (hub) 3D model from the turbocharger, free STL Open full screen →

Live 3D opens the whole turbocharger with the turbine wheel (hub) picked out, so you can see where it sits and how it moves. Open it full screen →

Download the turbine wheel (hub) STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the turbine wheel (hub)

The turbine wheel is spun by exhaust gas at up to 950 °C. Gas enters radially from the scroll, expands through the blades and leaves axially, giving up its energy to drive the compressor.

Investment-cast nickel superalloy, because nothing else keeps its strength at exhaust temperature.

Radial-inflow turbines are compact and cheap; large engines use axial turbines instead.

Key facts

Part ofTurbocharger: Journal-bearing turbo · Ø60 mm compressor · internal wastegate
SystemRotating group: Shaft, compressor wheel, turbine wheel, nut, collar and seal rings: everything that spins.
Quantity1
Size40 × 56 × 56 mm (real scale)
Mesh2,304 triangles
DiameterØ54 mm
Blades11
MaterialInconel 713C
Temperatureup to 950 °C inlet
FileSTL, millimetres, Z-up, 115 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the rotating group

Shaft, compressor wheel, turbine wheel, nut, collar and seal rings: everything that spins.

Questions about the turbine wheel (hub) 3D model

Is the turbine wheel (hub) 3D model free to download?

Yes. The turbine wheel (hub) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free turbocharger 3D model on Engine-X.

What file format is the turbine wheel (hub) 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 115 KB with 2,304 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the turbine wheel (hub)?

Yes. The STL is real scale (40 × 56 × 56 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Turbine wheel (hub) 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Turbine wheel (hub) 3D model (turbocharger) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/turbocharger-turbine-wheel-hub

All turbocharger parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.