Free part 3D model · STL · Live 3D

Turbine shaft 3D model

Part of the turbocharger 3D model · Rotating group · By Parth Parmar, mechanical design engineer · Updated

The turbine shaft joins the two wheels. Download the turbine shaft free as an STL file (19 KB, 150 × 12 × 12 mm), see it in live 3D inside the turbocharger, or get the whole machine.

Turbine shaft 3D model from the turbocharger, free STL Open full screen →

Live 3D opens the whole turbocharger with the turbine shaft picked out, so you can see where it sits and how it moves. Open it full screen →

Download the turbine shaft STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the turbine shaft

The turbine shaft joins the two wheels. The turbine wheel is friction-welded to one end; the compressor wheel is clamped on the other by a nut. At full boost it turns at 150,000 rpm or more, faster than anything else in the car.

Balanced as an assembly to a fraction of a gram-millimetre; a speck of dirt is enough to shake it.

Runs on floating oil films only: no ball bearings in this design.

Key facts

Part ofTurbocharger: Journal-bearing turbo · Ø60 mm compressor · internal wastegate
SystemRotating group: Shaft, compressor wheel, turbine wheel, nut, collar and seal rings: everything that spins.
Quantity1
Size150 × 12 × 12 mm (real scale)
Mesh384 triangles
Diameter8 mm at the journals
Speedup to 180,000 rpm
MaterialAlloy steel, welded to Inconel wheel
FileSTL, millimetres, Z-up, 19 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the rotating group

Shaft, compressor wheel, turbine wheel, nut, collar and seal rings: everything that spins.

Questions about the turbine shaft 3D model

Is the turbine shaft 3D model free to download?

Yes. The turbine shaft STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free turbocharger 3D model on Engine-X.

What file format is the turbine shaft 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 19 KB with 384 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the turbine shaft?

Yes. The STL is real scale (150 × 12 × 12 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Turbine shaft 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Turbine shaft 3D model (turbocharger) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/turbocharger-turbine-shaft

All turbocharger parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.