Free part 3D model · STL · Live 3D
Belt reference mark 3D model
Part of the pulley & belt drive 3D model · Belt & idler · By Parth Parmar, mechanical design engineer · Updated
A painted reference mark. Download the belt reference mark free as an STL file (59 KB, 15 × 9 × 12 mm), see it in live 3D inside the pulley & belt drive, or get the whole machine.
Open full screen →
Live 3D opens the whole pulley & belt drive with the belt reference mark picked out, so you can see where it sits and how it moves. Open it full screen →
Download the belt reference mark STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the belt reference mark
A painted reference mark. It isn’t a real part of the belt — it’s here so the belt’s motion is visible. Watch it travel: its speed along the loop never changes, even though the two pulleys spin at very different rates. That constant loop speed is the entire mechanism of a belt drive.
Key facts
| Part of | Pulley & belt drive: V-belt speed reducer · Ø100/Ø250 mm pulleys · 2.50 : 1 |
|---|---|
| System | Belt & idler: The V-belt, its reference marks, and the free-spinning idler pulley. |
| Quantity | 4 in the machine |
| Size | 15 × 9 × 12 mm (real scale) |
| Mesh | 1,176 triangles |
| File | STL, millimetres, Z-up, 59 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the belt & idler
The V-belt, its reference marks, and the free-spinning idler pulley.
Questions about the belt reference mark 3D model
Is the belt reference mark 3D model free to download?
Yes. The belt reference mark STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free pulley & belt drive 3D model on Engine-X.
What file format is the belt reference mark 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 59 KB with 1,176 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the belt reference mark?
Yes. The STL is real scale (15 × 9 × 12 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Belt reference mark 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Belt reference mark 3D model (pulley & belt drive) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/v-belt-drive-belt-reference-mark
All pulley & belt drive parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.