Free part 3D model · STL · Live 3D
Idler pulley (Ø50 mm) 3D model
Part of the pulley & belt drive 3D model · Belt & idler · By Parth Parmar, mechanical design engineer · Updated
An idler pulley, carrying no load of its own. Download the idler pulley (ø50 mm) free as an STL file (19 KB, 22 × 50 × 50 mm), see it in live 3D inside the pulley & belt drive, or get the whole machine.
Open full screen →
Live 3D opens the whole pulley & belt drive with the idler pulley (ø50 mm) picked out, so you can see where it sits and how it moves. Open it full screen →
Download the idler pulley (ø50 mm) STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the idler pulley (ø50 mm)
An idler pulley, carrying no load of its own. It presses on the belt’s slack side purely to keep enough tension in the loop for the wedging action to grip — too little tension and the belt slips; too much and it cooks the bearings.
Key facts
| Part of | Pulley & belt drive: V-belt speed reducer · Ø100/Ø250 mm pulleys · 2.50 : 1 |
|---|---|
| System | Belt & idler: The V-belt, its reference marks, and the free-spinning idler pulley. |
| Quantity | 1 |
| Size | 22 × 50 × 50 mm (real scale) |
| Mesh | 384 triangles |
| Radius | 25 mm |
| Type | Flat idler, free-spinning |
| File | STL, millimetres, Z-up, 19 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the belt & idler
The V-belt, its reference marks, and the free-spinning idler pulley.
Questions about the idler pulley (ø50 mm) 3D model
Is the idler pulley (ø50 mm) 3D model free to download?
Yes. The idler pulley (ø50 mm) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free pulley & belt drive 3D model on Engine-X.
What file format is the idler pulley (ø50 mm) 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 19 KB with 384 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the idler pulley (ø50 mm)?
Yes. The STL is real scale (22 × 50 × 50 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Idler pulley (Ø50 mm) 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Idler pulley (Ø50 mm) 3D model (pulley & belt drive) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/v-belt-drive-idler-pulley-50-mm
All pulley & belt drive parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.