Free part 3D model · STL · Live 3D
V-belt 3D model
Part of the pulley & belt drive 3D model · Belt & idler · By Parth Parmar, mechanical design engineer · Updated
The V-belt: a closed loop of rubber over steel or polyester cords, wedged into the pulleys’ grooves. Download the v-belt free as an STL file (88 KB, 8 × 313 × 568 mm), see it in live 3D inside the pulley & belt drive, or get the whole machine.
Open full screen →
Live 3D opens the whole pulley & belt drive with the v-belt picked out, so you can see where it sits and how it moves. Open it full screen →
Download the v-belt STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the v-belt
The V-belt: a closed loop of rubber over steel or polyester cords, wedged into the pulleys’ grooves. Wedging (not just friction on a flat face) is what lets it grip hard enough to transmit real power without slipping.
Runs slightly under the pulleys’ outer diameter, on the cord line partway down the V, which is the "effective" radius the speed ratio really uses.
Key facts
| Part of | Pulley & belt drive: V-belt speed reducer · Ø100/Ø250 mm pulleys · 2.50 : 1 |
|---|---|
| System | Belt & idler: The V-belt, its reference marks, and the free-spinning idler pulley. |
| Quantity | 1 |
| Size | 8 × 313 × 568 mm (real scale) |
| Mesh | 1,760 triangles |
| Section | A-section, 13 mm top width |
| Material | Rubber over cord |
| File | STL, millimetres, Z-up, 88 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the belt & idler
The V-belt, its reference marks, and the free-spinning idler pulley.
The same part in other machines
- V-beltin the reciprocating air compressor
Questions about the v-belt 3D model
Is the v-belt 3D model free to download?
Yes. The v-belt STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free pulley & belt drive 3D model on Engine-X.
What file format is the v-belt 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 88 KB with 1,760 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the v-belt?
Yes. The STL is real scale (8 × 313 × 568 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: V-belt 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). V-belt 3D model (pulley & belt drive) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/v-belt-drive-v-belt
All pulley & belt drive parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.