Free part 3D model · STL · Live 3D
Differential case 3D model
Part of the car differential 3D model · Ring gear & case · By Parth Parmar, mechanical design engineer · Updated
The differential case (carrier) holds the spider gears and side gears and turns with the ring gear. Download the differential case free as an STL file (72 KB, 156 × 192 × 192 mm), see it in live 3D inside the car differential, or get the whole machine.
Open full screen →
Live 3D opens the whole car differential with the differential case picked out, so you can see where it sits and how it moves. Open it full screen →
Download the differential case STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the differential case
The differential case (carrier) holds the spider gears and side gears and turns with the ring gear. It is bolted to the ring gear and turns with it. Inside it the cross shaft holds the spider gears, and the two side gears sit in its bores. Drawn see-through so the gears inside stay visible.
Key facts
| Part of | Car differential: Rear axle · open differential · 41 : 11 = 3.73 : 1 final drive |
|---|---|
| System | Ring gear & case: Ring gear, differential case, cross shaft and spider gears: they turn together, 3.73 times slower than the driveshaft. |
| Quantity | 1 |
| Size | 156 × 192 × 192 mm (real scale) |
| Mesh | 1,440 triangles |
| Material | Nodular cast iron |
| File | STL, millimetres, Z-up, 72 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the ring gear & case
Ring gear, differential case, cross shaft and spider gears: they turn together, 3.73 times slower than the driveshaft.
- Ring gear (41 teeth)
- Ring gear bolt
- Cross shaft
- Cross shaft lock bolt
- Spider gear
- Spider gear thrust washer
The same part in other machines
- Differential casein the manual gearbox
Questions about the differential case 3D model
Is the differential case 3D model free to download?
Yes. The differential case STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free car differential 3D model on Engine-X.
What file format is the differential case 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 72 KB with 1,440 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the differential case?
Yes. The STL is real scale (156 × 192 × 192 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Differential case 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Differential case 3D model (car differential) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/car-differential-differential-case
All car differential parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.