Free part 3D model · STL · Live 3D

Ring gear (41 teeth) 3D model

Part of the car differential 3D model · Ring gear & case · By Parth Parmar, mechanical design engineer · Updated

The ring gear (crown wheel), 41 teeth, bolted to the differential case. Download the ring gear (41 teeth) free as an STL file (76 KB, 24 × 255 × 255 mm), see it in live 3D inside the car differential, or get the whole machine.

Ring gear (41 teeth) 3D model from the car differential, free STL Open full screen →

Live 3D opens the whole car differential with the ring gear (41 teeth) picked out, so you can see where it sits and how it moves. Open it full screen →

Download the ring gear (41 teeth) STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the ring gear (41 teeth)

The ring gear (crown wheel), 41 teeth, bolted to the differential case. It turns the drive through 90°, from the lengthwise driveshaft to the crosswise axles, and slows it down 3.73 times, which multiplies the torque by the same factor.

"8.8-inch" axles are named after the ring gear diameter.

Ring and pinion are made and lapped as a matched pair and must be replaced together.

Key facts

Part ofCar differential: Rear axle · open differential · 41 : 11 = 3.73 : 1 final drive
SystemRing gear & case: Ring gear, differential case, cross shaft and spider gears: they turn together, 3.73 times slower than the driveshaft.
Quantity1
Size24 × 255 × 255 mm (real scale)
Mesh1,524 triangles
Teeth41
Pitch diaØ215 mm
Ratio41 : 11 = 3.73 : 1
FileSTL, millimetres, Z-up, 76 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the ring gear & case

Ring gear, differential case, cross shaft and spider gears: they turn together, 3.73 times slower than the driveshaft.

Questions about the ring gear (41 teeth) 3D model

Is the ring gear (41 teeth) 3D model free to download?

Yes. The ring gear (41 teeth) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free car differential 3D model on Engine-X.

What file format is the ring gear (41 teeth) 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 76 KB with 1,524 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the ring gear (41 teeth)?

Yes. The STL is real scale (24 × 255 × 255 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Ring gear (41 teeth) 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Ring gear (41 teeth) 3D model (car differential) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/car-differential-ring-gear-41-teeth

All car differential parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.