Free part 3D model · STL · Live 3D

Ring gear bolt 3D model

Part of the car differential 3D model · Ring gear & case · By Parth Parmar, mechanical design engineer · Updated

A ring gear bolt fixes the ring gear to the differential case. Download the ring gear bolt free as an STL file (5 KB, 32 × 15 × 17 mm), see it in live 3D inside the car differential, or get the whole machine.

Ring gear bolt 3D model from the car differential, free STL Open full screen →

Live 3D opens the whole car differential with the ring gear bolt picked out, so you can see where it sits and how it moves. Open it full screen →

Download the ring gear bolt STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the ring gear bolt

A ring gear bolt fixes the ring gear to the differential case. Ten of these clamp the ring gear to the differential case flange; they carry the full axle torque, so they are high-grade and torqued with thread locker.

Key facts

Part ofCar differential: Rear axle · open differential · 41 : 11 = 3.73 : 1 final drive
SystemRing gear & case: Ring gear, differential case, cross shaft and spider gears: they turn together, 3.73 times slower than the driveshaft.
Quantity10 in the machine
Size32 × 15 × 17 mm (real scale)
Mesh104 triangles
Grade10.9
FileSTL, millimetres, Z-up, 5 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the ring gear & case

Ring gear, differential case, cross shaft and spider gears: they turn together, 3.73 times slower than the driveshaft.

Questions about the ring gear bolt 3D model

Is the ring gear bolt 3D model free to download?

Yes. The ring gear bolt STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free car differential 3D model on Engine-X.

What file format is the ring gear bolt 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 5 KB with 104 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the ring gear bolt?

Yes. The STL is real scale (32 × 15 × 17 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Ring gear bolt 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Ring gear bolt 3D model (car differential) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/car-differential-ring-gear-bolt

All car differential parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.