Free part 3D model · STL · Live 3D

Spider gear 3D model

Part of the car differential 3D model · Ring gear & case · By Parth Parmar, mechanical design engineer · Updated

A spider (pinion) gear, one of two on the cross shaft inside the case. Download the spider gear free as an STL file (114 KB, 64 × 62 × 20 mm), see it in live 3D inside the car differential, or get the whole machine.

Spider gear 3D model from the car differential, free STL Open full screen →

Live 3D opens the whole car differential with the spider gear picked out, so you can see where it sits and how it moves. Open it full screen →

Download the spider gear STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the spider gear

A spider (pinion) gear, one of two on the cross shaft inside the case. Driving straight they do not spin at all: they just carry both side gears round with the case. In a turn they spin on the cross shaft and let one side gear run faster and the other slower by the same amount.

Key facts

Part ofCar differential: Rear axle · open differential · 41 : 11 = 3.73 : 1 final drive
SystemRing gear & case: Ring gear, differential case, cross shaft and spider gears: they turn together, 3.73 times slower than the driveshaft.
Quantity2 in the machine
Size64 × 62 × 20 mm (real scale)
Mesh2,272 triangles
Teeth10 (model)
FileSTL, millimetres, Z-up, 114 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the ring gear & case

Ring gear, differential case, cross shaft and spider gears: they turn together, 3.73 times slower than the driveshaft.

Questions about the spider gear 3D model

Is the spider gear 3D model free to download?

Yes. The spider gear STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free car differential 3D model on Engine-X.

What file format is the spider gear 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 114 KB with 2,272 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the spider gear?

Yes. The STL is real scale (64 × 62 × 20 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Spider gear 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Spider gear 3D model (car differential) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/car-differential-spider-gear

All car differential parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.